AI FOR PROPERTY & FACILITIES MANAGEMENT · UK
Property and facilities management is an administrative business wearing a maintenance coat. The cost sits in triaging repair reports written by people who are upset, dispatching contractors, chasing them for updates, keeping statutory certificates current across a portfolio, and explaining a service charge line to a leaseholder who has already emailed three times. AI automation reads those messy inputs — emails, photos, WhatsApp messages, contractor invoices, certificates — and keeps the work moving, with your managers deciding anything that commits spend, affects safety or touches a lease obligation.
Where AI pays off in property and facilities management
Reactive repair triage
TODAY
Repair reports arrive by email, phone, portal and photo, all in different words, and are triaged by whoever opens them.
WITH FORTH
Every report read, classified by trade, urgency and building, matched to the property and lease responsibility, and raised as a job with a target date before anyone has retyped it.
Contractor dispatch and chasing
TODAY
Jobs are issued by email and then chased manually until someone attends.
WITH FORTH
Jobs issued to the right contractor by trade and area, acknowledgement chased automatically, and no-shows escalated before the SLA clock runs out.
PPM and statutory compliance
TODAY
Gas, electrical, fire, lift, water and asbestos obligations are tracked across a portfolio in one person's spreadsheet.
WITH FORTH
Every asset and obligation held with its due date, certificates read and checked on return, renewals chased ahead of expiry, and gaps visible per building.
Tenant and leaseholder correspondence
TODAY
The inbox is a mixture of repairs, complaints, consents, arrears queries and service charge disputes, all urgent to the sender.
WITH FORTH
Correspondence read, classified, routed to the right manager with the property record attached, and acknowledged with an accurate status rather than a holding line.
Contractor invoice and quote checking
TODAY
Invoices are approved on trust because checking each one against the job and the schedule of rates takes longer than paying it.
WITH FORTH
Invoices matched to the job, the quote and the agreed rates automatically, with variances, duplicates and unapproved extras flagged rather than paid.
Service charge preparation
TODAY
Year-end service charge packs are rebuilt by hand from ledgers, contracts and invoices.
WITH FORTH
Expenditure classified against schedules as it happens, apportionment applied consistently, and the pack assembled from a record that has been correct all year.
Lease and document intelligence
TODAY
Answering 'who is responsible for that roof' means someone opening a PDF lease.
WITH FORTH
Leases, contracts and handbooks read into a searchable knowledge base, so responsibility, notice periods and break dates are answerable in seconds, with the clause cited.
Portfolio and client reporting
TODAY
Client reports are assembled manually the week they are due.
WITH FORTH
One live view of open jobs, SLA performance, compliance status, spend against budget and arrears by building — generated rather than compiled.
The systems we build for property and facilities management
Reactive repair triage
Every repair report read the moment it lands, classified by trade, urgency and lease responsibility, matched to the property and asset, and raised as a job with an SLA clock — with emergencies escalated by hard rule, not by model confidence.
Contractor dispatch and chasing
Dispatch to the right contractor, chase acknowledgement and attendance without a person doing it, and escalate before the SLA breaks — with the whole conversation recorded against the job.
PPM and statutory compliance
Every statutory and planned obligation held against the asset with its due date, chased ahead of expiry, evidenced with the certificate read and checked — and a portfolio view of what is compliant, due and overdue today.
Tenant and leaseholder communication
The shared inbox read and sorted continuously, routine status questions answered from the live job record, and everything else routed to the right manager with the history attached — always with a route to a person.
The problems operators bring us
Start from the thing that is costing you money rather than the technology.
Why repair SLAs slip — and how to stop it without changing contractors
SLAs slip in the gap between a repair being reported and a job being raised, not on site. Reading and raising every report the hour it arrives, then chasing acknowledgement automatically, recovers a day and a half per job without touching your supply chain.
Your compliance register is a spreadsheet and one person's memory
The risk is not the missed renewal you can see — it is the remedial action buried inside a certificate nobody opened, on a row already ticked as compliant. Reading every returned certificate and raising its remedials as jobs closes the gap a spreadsheet cannot.
When the managing agent's inbox becomes the whole job
Most of the inbox is people asking what is happening with something already logged — a question the system can answer perfectly and a human is currently answering badly. Clearing that majority is what gives managers time for the complaints that matter.
Where we keep humans in charge
- Safety-critical repairs — gas, fire, electrical, structural, anything with a risk to life — are escalated to a person immediately and never queued behind a classifier's confidence score.
- Statutory compliance decisions stay with the responsible person who carries the duty; the system tracks, chases and evidences, it does not sign anything off.
- Committing spend, approving invoices, granting consents and anything with a lease or legal consequence stays with your managers.
- Tenant and leaseholder data is personal data under UK GDPR, so systems are built inside your own tenancy with access controls, retention rules and a full audit log.
- Vulnerable-resident and complaint escalation paths are configured as hard rules, not left to a model's judgement.
Proof and local coverage
Edinburgh property and facilities management
Edinburgh-based team building property and FM automation for factors, managing agents and facilities providers across the city, the Lothians and Fife.
Glasgow property and facilities management
Automation for Glasgow and west of Scotland property managers and FM providers, weighted towards large mixed portfolios, contractor supply chains and client SLA reporting.
AI for property and facilities management, answered
- How is AI actually used in UK property and facilities management today?
- The practical uses are administrative: reading and classifying repair reports, dispatching and chasing contractors, tracking statutory compliance across a portfolio, checking contractor invoices against agreed rates, answering routine tenant queries from the live job record, and reading leases so responsibility questions can be answered without opening a PDF. Predictive maintenance gets the attention, but the reactive admin is where the hours and the client complaints actually are.
- We already use a property management system. Does this replace it?
- No. We connect to it. Your system holds the properties, tenancies and ledgers; the automation handles the reading, routing, chasing, matching and reporting that sits around it and is still done by hand.
- What does it cost?
- A first production workflow typically costs between £6,000 and £25,000 to build, plus a monthly running cost for hosting, model usage and support. The £499 Autonomous Business Audit is a five-day fixed-price review returning a costed, sequenced plan.
- What should a managing agent or FM provider automate first?
- Usually repair triage and contractor chasing. It is the highest-volume, most repetitive work in the business, it is measurable in SLA performance within weeks, and it is the thing clients and residents judge you on.
- How do you handle emergency and safety-critical reports?
- With hard rules rather than AI judgement. Defined keywords, categories and asset types route straight to a person and an out-of-hours path, regardless of what any classifier thinks. The automation speeds up the ordinary volume so your people have time for the serious ones.
- Will residents know they are dealing with automation?
- They should. Automatic acknowledgements say what has been logged, what happens next and when, and always offer a route to a person. We do not build systems that pretend to be a named member of staff.
TRUST & CREDENTIALS
How we work, and what stands behind it
This page is maintained by Forth Systems. Everything listed below describes our own team, hosting choices and the technologies we build on — it is a statement of practice, not an independent certification or an endorsement by the vendors named.
UK team & data residency
Who builds it, and where your data sits while they do.
UK-based engineers
Edinburgh-headquartered. Every system is designed, built and supported by our own UK-based engineering team — no offshore delivery pool.
UK / EU hosting by default
Applications and databases are provisioned in UK or EU regions unless you require otherwise, with encryption in transit and at rest.
Human-in-the-loop by design
Every AI system we ship keeps a manual override. Nothing irreversible happens without an operator able to review, edit or stop it.
Audit trails as standard
Automated actions are written as first-class records — who or what did it, when, against which input — so operations stay evidence-ready.
Systems we build on
The platforms our systems run on. These are the technologies we deploy and support — not sponsorships or reseller badges.
OpenAI, Anthropic & Google models
Model-agnostic delivery. We route each workload to the model that fits it on cost, latency and accuracy, and can switch without a rebuild.
Supabase & Postgres
Row-level-security Postgres as the operational spine under every platform we run.
Stripe payments
Payment capture, checkout and reconciliation wired directly into job and permit workflows.
Xero, Sage & HubSpot integrations
Production integrations into the finance and CRM systems UK operators already run, so automation lands where the business keeps its records.
Streetworks & industry credentials
Operational domains we build in daily, with the sector systems we integrate against.
DfT Street Manager integration
The permit chain we built for Kerbco creates and tracks streetworks permit applications against DfT Street Manager and local highway authority processes.
NRSWA-aligned workflows
Permit, reinstatement and traffic-management workflows built to the New Roads and Street Works Act process contractors are inspected against.
Traffic management planning
Roadplan produces signing and guarding layouts for council submission and for the crew installing them on site.
Operator-built, not consultancy-built
Our platforms are built around real operating workflows — including the permit chain we built for our client Kerbco, a Scottish drop kerb contractor.
Insurance certificates, registration numbers and security documentation are available on request — ask the team.
